Rockwell Automation 8520-ARM2 9/Series CNC AMP Reference Manual Documentation Set - Manual (Page 667)

Chapter
38
38-1
Open Control Interface (OCI)
Parameters
This chapter describes the parameters used to configure your 9/Series for
use with the open control interface (OCI). This interface allows the
connection of a personal computer to the 9/Series to serve as the primary
man machine interface or to allow data collection.
The workstation displays these screens when the “OCI Parameters” group
is selected:
Proj: AMPTEST Appl: AMP Utile: Edit
F2-Project F3-Application F4-Utility F5-Configuration F1-File F2-Axis F3-Options F4-Quick Edit! F5-Process
- OCI Parameters -
Max Number of OCI Connections : 1
CNC-OCI Data Transfer Rate : 100 msec
Monitor Frequency for Changes : 50 msec
OCI Foregrnd Data Buffers Size : 160 bytes
OCI Backgrnd Data Buffer1 Size : 3500 bytes
OCI Backgrnd Data Buffer2 Size : 3500 bytes
OCI Backgrnd Data Buffer3 Size : 3500 bytes
OCI Backgrnd Data Buffer4 Size : 3500 bytes
Type : Lathe Axis: X <P1> - linear P1: File : TEST
The above screens may differ slightly depending on the control you use.
38.0
Chapter Overview