Rockwell Automation 8520-ARM2 9/Series CNC AMP Reference Manual Documentation Set - Manual (Page 517)

Chapter
24
24-1
QuickPath Plus Parameters
The QuickPath Plus feature provides a convenient programming method
that simplifies programming of the control. Use this feature to create a
part program from a part drawing through the use of common drawing
dimensions such as angles, chamfer sizes, fillet radius, or line segment
length. Refer to your mill or lathe programming and operation manuals for
more information.
The workstation displays this screen after you select the “QPP Parameters”
group:
Proj: AMPTEST Appl: AMP Util: Edit
F2-Project F3-Application F4-Utility F5-Configuration F1-File F2-Axis F3-Options F4-Quick Edit! F5-Process
Type: Mill AXIS: X <P1> - linear P1: File : TEST
- QPP Parameters -
QPP Angle Word : A
QPP Angle Word Format : 3.3 degrees
L: Word Format : 4.4 inch and 5.3 metric
These pages cover the parameters that are available for the QuickPath
Plus feature:
Parameter: Page:
QPP Angle Word 24-2
QPP Angle Word Format 24-3
L: Word Format 24-4
24.0
Chapter Overview
24.1
QuickPath Plus Parameters