Rockwell Automation 8520-ARM2 9/Series CNC AMP Reference Manual Documentation Set - Manual (Page 688)

Tuning AMP at the Machine
Chapter 40
40-10
Important: If the rotary axis does not have a net amount of zero
calibration, the control will still allow this calibration to be applied to
the axis.
If data has been previously entered, the control displays a screen that list
the axis calibration points. This screen is a typical axis calibration screen.
Figure 40.2
Typical Online Axis Calibration Screen
AXIS CALIBRATION PAGE 1 OF 2
X AXIS - 0.1230 [ MM ]
ABSOLUTE DEVIATION
1 -76543.218 - 2.345679
2 -65432.187 0.345678
3 -54321.876 - 1.456717
4 -43218.756 1.234566
5 -32187.654 0.123455
6 -21876.543 - 0.345674
7 -18765.432 - 1.567893
8 - 7654.321 - 1.678902
9 - 6543.217 0.789121
10 - 654.321 0.912340
11 - 54.321 - 1.234561
12 - 4.321 0.789122
23 POINTS USED FOR AXIS X 905 FREE
REPLCE
VALUE
INSERT
POINT
DELETE
POINT
UPDATE
& EXIT
NEXT
AXIS
Important: An axis may have more than one screen of measurement
points assigned to it. If there is more than one page, pressing the down
cursor while holding the
[SHIFT]
key down displays the second page.