Rockwell Automation 8520-ARM2 9/Series CNC AMP Reference Manual Documentation Set - Manual (Page 366)

Spindle 3 Parameters
Chapter 14
14-2
To edit the spindle parameters, select ‘‘Spindle 3 Parameters” from the first
page of the main menu screen. The workstation displays these 3 screens:
Proj: AMPTEST Appl: AMP Util: Edit
F2-Project F3-Application F4-Utility F5-Configuration F1-File F2-Axis F3-Options F4-Quick Edit! F5-Process
Type : Mill AXIS: X <P1> - Spindle File : TEST
Spindle DAC Output Ramping <3> : On
Voltage at Max for Gear 1 <3> : 10.0000 volts
Voltage at Max for Gear 2 <3> : 10.0000 volts
Voltage at Max for Gear 3 <3> : 10.0000 volts
Voltage at Max for Gear 4 <3> : 10.0000 volts
Voltage at Max for Gear 5 <3> : 10.0000 volts
Voltage at Max for Gear 6 <3> : 10.0000 volts
Voltage at Max for Gear 7 <3> : 10.0000 volts
Voltage at Max for Gear 8 <3> : 10.0000 volts
Spindle Deviation Tolerance <3> : 100 %
Number of Gears Used <3> : 1
Min Spindle Speed - Gear 1 <3> : 0.0 rpm
Max Spindle Speed - Gear 1 <3> : 500.0 rpm
Page 1 of 4
- Spindle 3 Parameters -
Proj: AMPTEST Appl: AMP Util: Edit
F2-Project F3-Application F4-Utility F5-Configuration
- Spindle 3 Parameters -
Page 2 of 4
F1-File F2-Axis F3-Options F4-Quick Edit! F5-Process
Type : Mill AXIS: X <P1> - Spindle File : TEST
Proj: AMPTEST Appl: AMP Util: Edit
F2-Project F3-Application F4-Utility F5-Configuration
Max Spindle Speed - Gear 8 <3> : 500.0 rpm
Gain for Spindle 3 - Gear 1 <3> : 1.00000
Gain for Spindle 3 - Gear 2 <3> : 1.00000
Gain for Spindle 3 - Gear 3 <3> : 1.00000
Gain for Spindle 3 - Gear 4 <3> : 1.00000
Gain for Spindle 3 - Gear 5 <3> : 1.00000
Gain for Spindle 3 - Gear 6 <3> : 1.00000
Gain for Spindle 3 - Gear 7 <3> : 1.00000
Gain for Spindle 3 - Gear 8 <3> : 1.00000
Dev. Detection Filter Time <3> : 20 msec
Spindle Marker Calibration <3> : 0.000000 degrees
Orient Speed <3> : 10.0 rpm
Default Orient Direction <3> : Counter Clockwise
Page 3 of 4
- Spindle 3 Parameters -
F1-File F2-Axis F3-Options F4-Quick Edit! F5-Process
Type : Mill AXIS: X <P1> - Spindle File : TEST
Proj: AMPTEST Appl: AMP Util: Edit
F2-Project F3-Application F4-Utility F5-Configuration
Page 4 of 4
- Spindle 3 Parameters -
F1-File F2-Axis F3-Options F4-Quick Edit! F5-Process
Type : Mill AXIS: X <P1> - Spindle File : TEST
Default Orient Angle <3> : 0.000000 degrees
Orient Inposition Band <3> : 0.100000 degrees
Min Spindle Speed - Gear 2 <2> : 0.0 rpm
Max Spindle Speed - Gear 2 <2> : 500.0 rpm
Min Spindle Speed - Gear 3 <2> : 0.0 rpm
Max Spindle Speed - Gear 3 <2> : 500.0 rpm
Min Spindle Speed - Gear 4 <2> : 0.0 rpm
Max Spindle Speed - Gear 4 <2> : 500.0 rpm
Min Spindle Speed - Gear 5 <2> : 0.0 rpm
Max Spindle Speed - Gear 5 <2> : 500.0 rpm
Min Spindle Speed - Gear 6 <2> : 0.0 rpm
Max Spindle Speed - Gear 6 <2> : 500.0 rpm
Min Spindle Speed - Gear 7 <2> : 0.0 rpm
Max Spindle Speed - Gear 7 <2> : 500.0 rpm
Min Spindle Speed - Gear 8 <2> : 0.0 rpm