Rockwell Automation 8520-ARM2 9/Series CNC AMP Reference Manual Documentation Set - Manual (Page 519)

QuickPath Plus Parameters
Chapter 24
24-3
Function
This parameter specifies the maximum number of digits that are permitted
to the left and to the right of the decimal point for an angle word used in
QuickPath Plus programming.
Parameter Parameter
Number
QPP Angle Word Format [512]
Range
Selection Result
(a) 3.1 degrees
(b) 3.2 degrees
(c) 3.3 degrees
(d) 3.4 degrees
Notes
This is a global parameter; the value set here applies to all axes and
processes.
24.3
QPP Angle Word Format