Rockwell Automation 8520-ARM2 9/Series CNC AMP Reference Manual Documentation Set - Manual (Page 41)

Using AMP Applications and ODS Utilities
Chapter 2
2-15
If the open file has been edited, the workstation displays this screen:
Proj: AMPTEST Appl: AMP Util: Edit
F2-Project F3-Application F4-Utility F5-Configuration F1-File F2-Axis F3-Options F4-Quick Edit! F5-Process
Type : Lathe AXIS: X <P1:> - linear P1:
Axis Parameters
Home Parameters
Zone/Overtravel Parameters
Servo Parameters
Jog Parameters
Feedrate Parameters
Acc/Dec Parameters
CSS Parameters
Spindle 1 Parameters
Spindle 2 Parameters
Spindle 3 Parameters
Axis Program Format
Letter Format
Plane Select
Page 1 of 3
File : TEST
WARNING
Opened file has not been
saved.
Save (S)
Save As (A)
Discard (D)
3. Select the desired option.
The Discard option quits the open file without saving any editing
changes.
If you
select the:
and the Verify option of the
F5-Configuration menu is: the workstation:
Discard
option
OFF · discards any changes
· closes the open file
· exits the AMP editor
· returns to the main menu line of ODS
ON displays this screen:
Proj: AMPTEST Appl: AMP Util: Edit
F2-Project F3-Application F4-Utility F5-Configuration F1-File F2-Axis F3-Options F4-Quick Edit! F5-Process
Type : Lathe AXIS: X <P1:> - linear P1:
Axis Parameters
Home Parameters
Zone/Overtravel Parameters
Servo Parameters
Jog Parameters
Feedrate Parameters
Acc/Dec Parameters
CSS Parameters
Spindle 1 Parameters
Spindle 2 Parameters
Spindle 3 Parameters
Axis Program Format
Letter Format
Plane Select
Page 1 of 3
File : TEST
Are you sure?
Yes (Y)
No (N)