Rockwell Automation 8520-ARM2 9/Series CNC AMP Reference Manual Documentation Set - Manual (Page 262)

Jog Parameters
Chapter 8
8-4
Function
This parameter sets the resolution of the HPG (distance the axes travels per
HPG pulse) when performing an HPG jog with <SPEED/MULTIPLY> on
the MTB panel set to the MEDL X10.
Axis Parameter
Number
Axis Parameter
Number
(1) [1356] (7) [7356]
(2) [2356] (8) [8356]
(3) [3356] (9) [9356]
(4) [4356] (10) [10356]
(5) [5356] (11) [11356]
(6) [6356] (12) [12356]
Range
Pulse Count Multiplier - Low value to Pulse Count Multiplier - High value
The maximum and minimum values that may be set for this parameter are
dependant on the value set for the parameters “Pulse Count Multiplier -
Low” and “Pulse Count Multiplier - High.”
Notes
You must set this parameter independently for each axis.
The default setting for <SPEED/MULTIPLY> on the pushbutton MTB
panel is LOW X1.
8.1.2
Pulse Count Multiplier-Med