Rockwell Automation 8520-ARM2 9/Series CNC AMP Reference Manual Documentation Set - Manual (Page 96)

Chapter 4
Axis Parameters
4-12
Axis
Parameter
Number Axis
Parameter
Number
1 [1205] 9 [9205]
2 [2205] 10 [10205]
3 [3205] 11 [11205]
4 [4205] 12 [12205]
5 [5205] 13 [13205]
6 [6205] 14 [14205]
7 [7205] 15 [15205]
8 [8205]
Range
Selection Result
(a) True
(b) False
Notes
Most angled-wheel cylindrical grinder applications require the virtual axis
(typically X) to be configured as a diameter axis. Since the virtual axis is
not a real axis, it cannot be selected for configuration with the F2 option.
Configure the virtual axis as a diameter axis by selecting the wheel axis
(typically W) as a diameter axis. This forces both the virtual and the wheel
axes to be diameter axes.
Each of these parameters must be set independently for each linear axis.