Rockwell Automation 8520-ARM2 9/Series CNC AMP Reference Manual Documentation Set - Manual (Page 52)

Using AMP Applications and ODS Utilities
Chapter 2
2-26
7. Select the Control option.
The workstation displays this screen:
Proj: TEST Appl: Upload Util: Get AMP params
F2-Project F3-Application F4-Utility F5-Configuration F1-File
Name of file to be uploaded
Type in name. Press ENTER when done, or ESC to cancel.
AMP1 AMP2 AMP3
Enter Name: [ ]
8. Type in a new file name for the file that will be uploaded, then press
[ENTER]
.
Important: You must assign a new name to the AMP file that is
uploaded.
The workstation displays this screen:
Proj: TEST Appl: Upload Util: Get AMP params
F2-Project F3-Application F4-Utility F5-Configuration F1-File
Upload in progress
Percent transferred 50%