Rockwell Automation 8520-ARM2 9/Series CNC AMP Reference Manual Documentation Set - Manual (Page 697)

Tuning AMP at the Machine
Chapter 40
40-19
This screen is displayed on the operator panel CRT:
ACTIVE COPY PARAMETERS
FROM: PORT A (or PORT B)
TO: AMP
DEVICE:
ALLEN-BRADLEY 1770-SB
BAUD RATE: 1200
PARITY: NONE
STOP BITS: 1
DATA LENGTH: 8
YES NO
If you want: Press this softkey:
the control to download the AMP file to the
storage device
{YES}
the download procedure to abort {NO}
Important: Refer to chapter 2 for information on downloading AMP from
the workstation to the control or uploading AMP from the control to
the workstation.
Use this procedure to upload a file from the control to a storage device :
At the storage device:
1. Connect the storage device to the control.
Refer to your integration and maintenance manual for more information
on cabling.
2. Turn “ON” the storage device.
3. Load an AMP data cassette into the storage device.
40.10
Uploading AMP Files