Rockwell Automation 8520-ARM2 9/Series CNC AMP Reference Manual Documentation Set - Manual (Page 434)

Power-up G-code Parameters
Chapter 19
19-2
Access these parameters by selecting the “Power-up G Codes” parameter
group displayed on the main AMP menu screen. When you select the
“Power-up G Codes” parameter group, the workstation displays
this screen:
Proj: AMPTEST Appl: AMP Util: Edit
F2-Project F3-Application F4-Utility F5-Configuration F1-File F2-Axis F3-Options F4-Quick Edit!
Control Type: Lathe Axis : X - linear File : TEST
- Power-up G Codes -
These parameters appear only if the
selected application type is Lathe.
PTO G code for modal group 5 : IPM/MMPM
PTO G code for modal group 6 : Inch mode
PTO G code for modal group 1 : G01
PTO Plane Select G-code : G18
PTO G code for modal group 3 : G90
PTO G code for modal group 10 : Init Level Return
PTO G code for modal group 13 : G64 (Cutting Mode)
PTO G code for modal group 18 : G07 (Radius)
PTO G code for modal group 20 : G39 (Cutter Comp Linear)
PTO G code for modal group 22 : G36 (Short Block Feed Clamped)
PTO Work Coordinate : NONE
PTO G code for modal group 4 : G23
PTO ACC/DEC Mode : G47 (Linear ACC/DEC)
Your screens may differ slightly, depending on your application.
These parameters are covered on these pages:
Parameter: Page:
PTO G--code for modal group 5 19-3
PTO G--code for modal group 6 19-4
PTO G--code for modal group 1 19-5
PTO plane select G-code 19-6
PTO G--code for modal group 3 19-7
PTO G--code for modal group 8 19-8
PTO G--code for modal group 18 19-9
PTO work coordinate 19-10
PTO G--code for modal group 4 19-11
CSS (On/Off) 19-12
PTO G--code for modal group 10 19-13
PTO G--code for modal group 13 19-14
PTO G--code for modal group 15 19-15
PTO G--code for modal group 20 19-16
PTO G--code for modal group 22 19-17
PTO ACC/DEC mode 19-18
For details on specific G-codes and their meanings, refer to one of your
programming and operation manuals.
19.1
PTO G- code