Rockwell Automation 8520-ARM2 9/Series CNC AMP Reference Manual Documentation Set - Manual (Page 681)

Tuning AMP at the Machine
Chapter 40
40-3
When the
{REVERS ERROR}
softkey is pressed, this screen is
displayed on the operator panel CRT:
REVERSAL ERROR
AXIS VALUE
X 0.000 [ MM ]
Y 0.000 [ MM ]
Z 0.000 [ MM ]
U 0.000 [ MM ]
REPLCE
VALUE
ADD TO
VALUE
UPDATE
& EXIT
QUIT
3. Use the up or down cursor keys to highlight the axis reversal error
value that is to be changed.
For Dual Processing controls, the status bar indicates which process
is being displayed. Press the
{PROC SELECT}
key to change the
active process. You can only access the axes in the currently selected
process.
To replace the current reversal error compensation data with
new data:
cursor to the value you want to change
press the
{REPLCE VALUE}
softkey
key-in the new data
press
[TRANSMIT]