Rockwell Automation 8520-ARM2 9/Series CNC AMP Reference Manual Documentation Set - Manual (Page 324)

Constant Surface Speed
Chapter 11
11-2
When you select the “CSS Parameters” group from the main menu, the
workstation displays this screen:
Proj: AMPTEST Appl: AMP Util: Edit
F2-Project F3-Application F4-Utility F5-Configuration F1-File F2-Axis F3-Options F4-Quick Edit!
Control Type: Cylindrical Axis : X - linear File : TEST
- CSS Parameters -
Default CSS axis name : X
CSS axis name for P1 : X
CSS axis name for P2 : Y
CSS axis name for P3 : Z
CSS axis name for P4 : U
CSS axis name for P5 : V
CSS axis name for P6 : W
CSS axis name for P7 : A
CSS axis name for P8 : B
CSS axis name for P9 : C
CSS Radius during G00 rapid : Programmed Endpoint
Per minute -or- per second : Per Second
Your screens may differ slightly, depending on your application type.
Use these parameters to configure the CSS feature:
Parameter: Page:
Default CSS axis name 11-3
CSS axis name for P1 - P9 11-4
CSS radius during G00 rapid 11-5
Per minute -or- per second 11-6
Using synchronized spindles with CSS 11-6
11.1
CSS Parameters