Rockwell Automation 8520-ARM2 9/Series CNC AMP Reference Manual Documentation Set - Manual (Page 33)

Using AMP Applications and ODS Utilities
Chapter 2
2-7
To copy an AMP file from the current project:
1. Press
[F1]
to pull down the F1-File menu.
2. Press
[C]
to select the Copy option.
The following screen appears:
Proj: AMPTEST Appl: AMP Util: Edit
F2-Project F3-Application F4-Utility F5-Configuration F1-File F2-Axis F3-Options F4-Quick Edit! F5-Process
Type : Lathe AXIS: X <P1> - linear P1: File : TEST
Copy From File...
Use ARROW keys or type in name. Press ENTER when done or ESC to cancel.
AMP1 AMP2 AMP3
Your screens may differ slightly, depending on the application you use.
3. Select the AMP file to copy.
4. Type in the name for the new file; then press
[ENTER]
.
A file name can contain up to 8 letters and/or numbers and
underscores (_).
The workstation copies the selected file and stores it under the
specified name.
5. Open the file for editing.
2.3.3
Copying an AMP File from
the Current Project