Rockwell Automation 8520-ARM2 9/Series CNC AMP Reference Manual Documentation Set User Manual
Page 50
Using AMP Applications and ODS Utilities
Chapter 2
2-24
The currently active AMP file in the control or an AMP file stored in a
storage device can be edited. These files must be uploaded to the
workstation before they can be edited. Use the upload application of ODS
to upload AMP files in these ways:
from the control to the workstation
from the control to a storage device, then from the storage device to the
workstation
Important: If you are using a DH+ network to upload AMP using the pass
through feature, see page 2-32 for details on enabling pass through.
To upload an AMP file to the workstation directly from the control:
1.
Connect the control to the workstation.
2.
Return to the main menu line of ODS.
3.
Press
[F3]
to pull down the Application menu.
The workstation displays this screen:
Proj:
TEST
Appl:
none
Util:
none
F2-Project
F1-File
AMP
(A)
PAL
(P)
I/O Assignments
(I)
Part Program
(R)
Upload
(U)
Download
(D)
F4-Utility
F5-Configuration
F3-Application
4.
Select the Upload application.
5.
Press
[F4]
to pull down the Utility menu.
2.13
Uploading AMP Files
2.13.1
Uploading an AMP File from
the Control to the
Workstation