Rockwell Automation 8520-ARM2 9/Series CNC AMP Reference Manual Documentation Set - Manual (Page 658)

Miscellaneous Parameters
Chapter 37
37-18
Function
Use this parameter only in 7300 mode. Use this parameter to define the
location to which the axes move when an M06 block is executed. This
parameter is valid only if the parameter Move Tool to 7300/M06 Position
is set to “True.”
The position you defined here is referenced in the machine coordinate
system. All offsets are ignored.
Axis Parameter
Number
Axis Parameter
Number
(1) [1025] (7) [7025]
(2) [2025] (8) [8025]
(3) [3025] (9) [9025]
(4) [4025] (10) [10025]
(5) [5025] (11) [11025]
(6) [6025] (12) [12025]
Range
--100000.00000 to 100000.00000 inch
or
--2540.00000 to 2540.00000 metric
Notes
The M06 location you define here must be within the overtravel limits you
assigned for each axis in the “Zone/Overtravel Parameters” group.
This parameter must be set independently for each axis.
37.20
7300/M06 Home Position