HEIDENHAIN CNC Pilot 4290 V7.1 - Manual (Page 13)

HEIDENHAIN CNC PILOT 4290 13
4.10 Front and Rear Face Contours ..... 172
Starting point of front/rear face contour G100-Geo ..... 172
Line segment in front/rear face contour G101-Geo ..... 172
Circular arc in front/rear face contour G102/G103-Geo ..... 173
Bore hole on front/rear face G300-Geo ..... 174
Linear slot on front/rear face G301-Geo ..... 175
Circular slot on front/rear face G302/G303-Geo ..... 175
Full circle on front/rear face G304-Geo ..... 176
Rectangle on front/rear face G305-Geo ..... 176
Eccentric polygon on front/rear face G307-Geo ..... 177
Linear pattern on front/rear face G401-Geo ..... 177
Circular pattern on front/rear face G402-Geo ..... 178
4.11 Lateral Surface Contours ..... 179
Starting point of lateral surface contour G110-Geo ..... 179
Line segment in a lateral surface contour G111-Geo ..... 179
Circular arc in lateral surface contour G112-/G113-Geo ..... 180
Hole on lateral surface G310-Geo ..... 181
Linear slot on lateral surface G311-Geo ..... 182
Circular slot on lateral surface G312/G313-Geo ..... 182
Full circle on lateral surface G314-Geo ..... 183
Rectangle on lateral surface G315-Geo ..... 183
Eccentric polygon on lateral surface G317-Geo ..... 184
Linear pattern on lateral surface G411-Geo ..... 185
Circular pattern on lateral surface G412-Geo ..... 186
4.12 Tool Positioning ..... 187
Rapid traverse G0 ..... 187
Setting the tool change position G14 ..... 187
Rapid traverse to machine coordinates G701 ..... 188
4.13 Simple Linear and Circular Movements ..... 189
Linear path G1 ..... 189
Circular path G2/ G3 ..... 190
Circular path G12/ G13 ..... 191
4.14 Feed Rate and Spindle Speed ..... 192
Rotational speed limiting G26 ..... 192
Acceleration (slope) G48 ..... 192
Interrupted feed G64 ..... 193
Feed per minute for rotary axes G192 ..... 193
Feed per tooth Gx93 ..... 194
Constant feed rate G94 (feed per minute) ..... 194
Feed per revolution Gx95 ..... 194
Constant surface speed Gx96 ..... 195
Speed Gx97 ..... 195