HEIDENHAIN CNC Pilot 4290 V7.1 - Manual (Page 648)

648
9.2 Service F
unctions
System service
“Sys.srv.” (System service) drop-down menu
„ Date/Time: Error messages are recorded together with the date
and time they occurred. Since all errors are stored in a log file for a
long period of time, you should always ensure that the date and time
are correctly set. These data facilitate the fault diagnosis in case you
require field service.
„ Language switching: Select the language with the soft key “>>”
and press “OK”. The selected screen language becomes effective
as soon as you restart the CNC PILOT.
„ FWL-editing – Language dependent: Currently not used.
„ FWL-editing – Language independent: Editing the fixed-word lists
for workpiece material, cutting material and fits (see “Fixed-word
lists” on page 649).
„ Aux. images ON/OFF: When “Aux. images ON” is active, the
graphic support windows of Machine mode are not displayed.
„ Editing switch ON/OFF: This function protects the following
operating modes from unauthorized access. When “Editing switch
ON” is active, these menu items can only be selected if you are
logged on as an NC programmer (or higher):
„ DIN PLUS
„ TURN PLUS
„ Parameter