21 simple t u rn ing cy cles – HEIDENHAIN CNC Pilot 4290 V7.1 User Manual
Page 233
Advertising
HEIDENHAIN CNC PILOT 4290
233
4.21 Simple T
u
rn
ing Cy
cles
Cycle run
1
Calculates the number of cutting passes (infeeds).
2
Approaches workpiece for first pass from starting point on
paraxial path.
3
Moves at feed rate to target point X.
4
Depending on algebraic sign of K:
K<0: Machines contour outline
K>0: Retracts by 1 mm at 45°
5
Returns at rapid traverse and approaches for next pass.
6
Repeats 3 to 5 until target point Z has been reached.
7
Move to:
X: Starting point of cycle
Z: Last retraction coordinate
Advertising