HEIDENHAIN CNC Pilot 4290 V7.1 - Manual (Page 530)

530
6.14 Int
e
ra
ctiv
e W
o
rk
ing Plan Gener
a
tion (IWG)
Engraving (G840)
The IWG generates the cycle G840, including the following
parameters, for the selected open or closed contour.
Parameters
K Retraction plane (default: back to starting position)
„ Front/read face: Position in Z direction
„ Lateral surface: Position in X direction (diameter)
P Milling depth – plunging depth of the tool