HEIDENHAIN CNC Pilot 4290 V7.1 - Manual (Page 342)

342
4.38 Lathes with Multiple Slides
Machining with four-axis cycle
„ Slides 1 and 2 execute the roughing operation together (N8 to N15).
During this, the roughing cycle G810 is used as four-axis cycle.
„ Then slide 1 finishes the contour (N16 to N18).
DIN program with four-axis machining
$1$2 N 21 M97 Slide 2 waits for slide 1
ZUORDNUNG $2 [ASSIGNMENT] Slide 2: Finishing
N 22 G59 Z200
N 23 T4
N 24 G95 F0.2 G96 S250 M4
N 25 G0 X40 Z0
N 26 M108
N 27 G47 P3
N 28 G890 NS3 NE3 V3
N 29 G0 X13 Z4
N 30 G47 P3
N 31 G890 NS4 NE6
N 32 M109
N 33 G0 X60 Z10
N 34 G14 Q0
$1$2 N 35 M97 Synchronize slides 1 and 2
$1$2 N 36 M30 Program end for slides 1 and 2
ENDE [END]
%4ACHS.NC
PROGRAMMKOPF [PROGRAM HEAD]
#SCHLITTEN $1$2 [SLIDE]
. . .
REVOLVER 1 [TURRET]
T 1 ID"111-80-080.1" Roughing tool
T 2 ID"121-55-040.1" Finishing tool
. . .
REVOLVER 2 [TURRET]
T 1 ID"111-80-040.1" Roughing tool
. . .
ROHTEIL [WORKPIECE BLANK]
N 1 G20 X100 Z200 K0