HEIDENHAIN CNC Pilot 4290 V7.1 - Manual (Page 154)

154
4.7 Cont
our F
o
rm
Elements
B Outside radius/chamfer at corner near the starting point
(default: 0)
„ B>0: Rounding radius
„ B<0: Chamfer width
P Outside radius/chamfer at corner far from the starting point
(default: 0)
„ P>0: Radius of the rounding arc
„ P<0: Chamfer width
R Inside radius in both corners of recess (default: 0)
The CNC PILOT refers the recess depth to the reference
element. The recess base runs parallel to the reference
element.
Parameters