HEIDENHAIN CNC Pilot 4290 V7.1 - Manual (Page 181)

HEIDENHAIN CNC PILOT 4290 181
4.1
1
Lat
er
al Surf
ace Cont
ours
Hole on lateral surface G310-Geo
G310 defines a hole with countersink and thread in a lateral surface
contour.
Parameters
Z Center (Z position)
C Center (angle)
CY Center as linear value; reference: unrolled reference diameter
B Diameter of hole
P Depth of hole (excluding point)
W Point angle (default: 180°)
R Sinking diameter
U Sinking depth
E Sinking angle
I Thread diameter
J Thread depth
K Thread runout length
F Thread pitch
V Left-hand or right-hand thread (default: 0)
„ V=0: Right-hand thread
„ V=1: Left-hand thread
A Angle to Z axis; range: 0° < A < 180°; (default: 90° = vertical
hole)
O Centering diameter
Machine the G310 holes with G71...G74.