HEIDENHAIN CNC Pilot 4290 V7.1 User Manual
Page 533
HEIDENHAIN CNC PILOT 4290
533
6.14 Int
e
ra
ctiv
e W
o
rk
ing Plan Gener
a
tion (IWG)
Defining a subprogram call
Select “Special machining > Free input > Single block > Technology”
in the IWG menu.
Select “Subprogram.” TURN PLUS opens the selection box with the
available subprograms.
Select the desired subprogram and define the transfer parameters.
Select “G and M functions.”
Define the target position and strategy for the path of traverse (see
soft key table).
Select “Cutting data.” Check/optimize the cutting data suggested by
TURN PLUS.
Select “Single block > Linear path G1.” TURN PLUS opens the “Linear
path G1” dialog box.
Define the target position and strategy for the path of traverse (see
soft key table).
If required, select “Technology > G and M functions” (“..>
Subprogram” or “.. > General technology“) to define special
functions.