HEIDENHAIN CNC Pilot 4290 V7.1 User Manual
Page 290
290
4.28 Assignment, S
y
nc
hr
onization, W
o
rk
piece T
ransf
er
Example of tailstock function
As of software version 625 952-04:
Check whether the end point is reached:
G916 D3
On reaching the fixed stop, the CNC PILOT stops the slide and
saves the stop position in the variables V901 to V918.
If the fixed stop is not reached, the CNC PILOT completes the
programmed path of traverse and enters the error number 5519
in variable V982.
. . .
$2 N.. G94 F800
$2 N.. G0 Z20
Pre-position slide 2
$2 N.. G916 H250 D1 G1 Z-10
Activate the tailstock function—contact force
250 daN
. . .
$2 N.. G916 D2 G1 Z100
Deactivate the tailstock function and retract the
tailstock
As of software version 625 952-04:
Lag error monitoring is not activated until the acceleration
phase has been completed.