HEIDENHAIN CNC Pilot 4290 V7.1 - Manual (Page 681)

HEIDENHAIN CNC PILOT 4290 681
1
0
.4 File Or
g
a
nization
Managing files
Manage CNC PILOT files
Select “Org(anization)” in the Transfer menu.
Define a mask to limit the number of files displayed.
Place the cursor on the parameter or operating resource file.
Mark the required files.
Press ENTER. The CNC PILOT displays the file contents.
Press the soft key. The CNC PILOT deletes the
marked files.
Press the soft key and enter the new file name. The
CNC PILOT renames the file.
Press the soft key and enter the name of the new file.
The CNC PILOT copies the file.
Press the soft key. The CNC PILOT prepares the data
for printout and outputs it to the file PRINT_xx.txt (xx:
00 to 19) in the “Data” directory.