Two slides work simultaneously, 38 lathes with multiple slides – HEIDENHAIN CNC Pilot 4290 V7.1 User Manual
Page 338
Advertising
338
4.38 Lathes with Multiple Slides
Two slides work simultaneously
In a first roughing operation the workpiece is machined to the point
at which it can be recess turned.
The recessing (N26 to N34) is conducted parallel to further roughing
operations (N20 to N25)
Slide 1 defines the cutting speed. For this reason it is
moved after the roughing operation to a parking position
that allows an adequate cutting speed.
Advertising