HEIDENHAIN CNC Pilot 4290 V7.1 - Manual (Page 382)

382
5.5 3-D V
iew
5.5 3-D View
Influencing the 3-D view
In the 3-D view the CNC PILOT shows the workpiece in its simulated
condition. If you call the 3-D view from the main menu or from the
contour simulation, the finished part is depicted.
Calling 3-D view:
U Select “3-D view” or “Contour > 3-D view”
U Depiction as “solid-body model” in the standard view
(not rotated, not enlarged/reduced)
U Depiction as wire model
To rotate the workpiece:
U Press the cursor keys, plus key or minus key
To magnify the graphic:
U Press the soft key or the PgDn key
To reduce the displayed graphic:
U Press the soft key or the PgUp key
To exit the 3-D view:
U ESC key
The 3-D view includes contours machined by turning, but
not for C or Y or B operations.