HEIDENHAIN CNC Pilot 4290 V7.1 - Manual (Page 91)

HEIDENHAIN CNC PILOT 4290 91
3.5 A
u
to
matic Mode
3.1 Return the tool and “scrambled takeoff”
Start the return motion program.
The “Scrambled takeoff on restart?” dialog box appears. Enter 1
(=yes)
Takeoff from IP:
The “Start from point of interruption (IP)” dialog box appears. Enter 0
(= to IP)
The return motion program positions the tool from/before the
interruption point and continues the program without stopping.
Takeoff before IP:
The “Start from point of interruption (IP)” dialog box appears. Enter 1
(=before IP)
Then, in the “Distance from the interruption point” dialog box, enter
the distance from the point of interruption
The return motion program positions the tool before the interruption
point and continues the program without stopping.
The inspection cycle has been completed.