HEIDENHAIN CNC Pilot 4290 V7.1 - Manual (Page 36)

36
1
.2 The Modes of Oper
ation
The actual control is not accessible to the machinist. You should know,
however, that your CNC PILOT stores all TURN PLUS and DIN PLUS
programs that you enter on an integrated hard disk. This allows you to
save a vast number of programs.
For data exchange and data backup, you can use the Ethernet
interface and the USB memory medium. Data exchange on the basis
of the serial interface (RS-232) is also possible.
Service organization mode: In Service you log in for
password-protected functions, select the conversational
language and make system settings. This operating
mode also provides diagnostic functions for
commissioning and checking the system.
Transfer organization mode: In Transfer, you exchange
data with other systems, organize your programs and
back-up your data.
Operating modes