Defining the cutting limit, Deleting the chucking data, 13 pr epar ing a mac h ining pr ocess – HEIDENHAIN CNC Pilot 4290 V7.1 User Manual
Page 484
Advertising
484
6.13 Pr
epar
ing a Mac
h
ining Pr
ocess
Defining the cutting limit
TURN PLUS finds the cutting limit on the outside and inside of the
contour when the workpiece is chucked at the spindle.
Edit the cutting limit:
U
Select “Prepare > Chucking > Clamp > Cutting limitation.” TURN
PLUS opens the “Cutting limitation for AWG” dialog box.
U
Define the cutting limit.
The cutting limit is displayed as a red line.
Deleting the chucking data
This function deletes all data used for clamping a workpiece and
deletes the defined cutting limits.
Delete the chucking data:
U
Select “Chucking > Delete chuck plan.”
Parameters
Outside contour
Position of the cutting limit
Inside contour
Position of the cutting limit
Advertising