HEIDENHAIN CNC Pilot 4290 V7.1 - Manual (Page 329)

HEIDENHAIN CNC PILOT 4290 329
4.36 Subpr
ogr
a
ms
Help graphics for subprogram calls
With help graphics you illustrate the calling parameters of
subprograms. The CNC PILOT places the help graphics to the left next
to the dialog box of the subprogram call.
As of software version 625 952-04:
If you append an underscore _ and the input field name to the name
of the help graphic, the CNC PILOT will display a separate graphic for
that input field. If no separate help graphic exists for an input field, the
graphic for the subprogram will be displayed (if available).
Graphic format:
„ BMP
„ Size 410x324 pixels
You integrate help graphics for subprogram calls as follows:
U Give the help graphic the name of the subprogram (followed by the
entry field name, if required) and the extension “.ico”.
U Transfer the help graphic to the Data directory (on DataPilot to the
machine-dependent Data directory).
U Copy the file UpHelp.res and give the copy the name of the help
graphic and the extension .res. This file is likewise in the Data
directory. (One res file must be provided for each graphic file.)