HEIDENHAIN CNC Pilot 4290 V7.1 - Manual (Page 649)

HEIDENHAIN CNC PILOT 4290 649
9.2 Service F
unctions
Fixed-word lists
Material/Cutting material: The CNC PILOT manages the
designations of workpiece materials and cutting materials in fixed-
word lists. Use them to adapt the technology database to your
requirements (see “Technology Database” on page 641).
Fit: The parameter “Fit” is included for the delta drill and reamer tools.
Specify the desired fit qualities in the “0WZPASSU” fixed-word list.
Note on editing fixed-word lists:
„ Maximal 64 entries
„ Code
„ Numbers from 0 to 63
„ Do not assign the same code twice.
„ Designation
„ Maximal 16 characters
Editing a fixed-word list
Select “Sys.Srv. > FWL-editing > Language independent”. The CNC
PILOT opens the “Selection of fixed-word list entries” dialog box.
Select one of the following files:
“0TEMATER” (workpiece material)
“0TESTOFF” (cutting material)
“0WZPASSU” (fit quality)
Edit entry:
Select the entry you want to edit. Press ENTER.
Change the code and/or designation.
Press OK The CNC PILOT saves the data.
New entry:
Open the “Editing fixed-word lists” dialog box.
Enter a code and designation.
Press OK. The CNC PILOT saves the data.