HEIDENHAIN CNC Pilot 4290 V7.1 - Manual (Page 80)

80
3.4 Set
u
p F
unctions
Measure tools with an optical gauge
Select the X/Z input field
Align the tool point in the X/Z direction with the cross hairs.
Load the value (or Z position)
Enter the tool dimensions
Calculate the tool compensation
Move the tool into position
Select Setting up > Tool set-up > Tool compensation
Assign the handwheel to the X axis and move the tool by the
compensation value
Assign the handwheel to the Z axis and move the tool by the
compensation value
The CNC PILOT loads the compensation values.