HEIDENHAIN CNC Pilot 4290 V7.1 - Manual (Page 672)

672
1
0
.2 D
a
ta T
ransf
er
Ethernet-based transfer
Select “Network” (or “FTP”) in the Transfer menu.
Define a mask to limit the number of files displayed.
Transmit files:
Place the cursor in the left window.
Mark the files you want to transfer.
Press the soft key. The CNC PILOT transfers the
marked files to the communications partner.
Receive files:
Place the cursor in the right window.
Mark the files you want to load.
Press the soft key. The CNC PILOT transfers the
marked files from the communications partner.
Press the ESC key to return to the Transfer main
menu.
Change communications partners
Log on as NC programmer (or higher).
Select “Setting > Network” (or “FTP”) in the Transfer menu.
Adjust the entry in “Transfer directory” or in “Address/Name of FTP
server” for the new communications partner.