Lateral surface: starting point, 8 c-axis cont ours – HEIDENHAIN CNC Pilot 4290 V7.1 User Manual
Page 435
Advertising
HEIDENHAIN CNC PILOT 4290
435
6.8 C-Axis Cont
ours
Lateral surface: Starting point
This function defines the starting point of a “free contour” on the
lateral surface.
Parameters
Z
Starting point of contour
P
Starting point of contour – polar
CY
Starting point of contour – angle as “linear dimension”
C
Starting point of contour – angle
Advertising