Overview of tool types, 1 t o ol d a tabase – HEIDENHAIN CNC Pilot 4290 V7.1 User Manual
Page 612
612
8.1 T
o
ol D
a
tabase
Overview of tool types
Lathe tools
Roughing tool (type 11x)
Finishing tool (type 12x)
Threading tool, standard (type 14x)
Recessing tool (type 15x)
Parting tool (type 161)
Button tool (type 21x)
Copying tool (type 22x) – TURN PLUS uses copying tools only for
undercut types H and K.
Recess-turning tool (type 26x)
Knurling tool (type 27x)
Special turning tool (type 28x)
Main machining direction (third digit of tool type): see figure
Drilling tools
Centering tool (type 31x)
NC center drill (type 32x)
Twist drill (type 33x)
Indexable-insert drill (type 34x)
Counterbore (type 35x)
Countersink (type 36x)
Tap (type 37x)
Step drill (type 42x)
Reamer (type 43x)
Tap drill (type 44x)
Delta drill (type 47x)
Turn-out tool (type 48x) – not used by TURN PLUS
Special drilling tool (type 49x)
Main machining direction (third digit of tool type): see figure
Special tools are tools that do not fit into any other type.
They are not used for contour cycles and are not used by
TURN PLUS..