HEIDENHAIN CNC Pilot 4290 V7.1 - Manual (Page 532)

532
6.14 Int
e
ra
ctiv
e W
o
rk
ing Plan Gener
a
tion (IWG)
Special machining (SM)
“Special machining” defines a work block that is integrated in the
working plan. In special machining you add paths of traverse,
subprogram calls or G/M functions (example: use of tool handling
systems).
Defining tool paths at feed rate or rapid traverse
Select “Special machining > Free input” in the IWG menu.
Press “Tool.”
Select and position the tool.
Select “Single block > Rapid traverse G0.” TURN PLUS opens the
“Rapid traverse G0” dialog box.
Define the target position and strategy for the path of traverse (see
soft key table).
Select “Cutting data.” Check/optimize the cutting data suggested by
TURN PLUS.
Select “Single block > Linear path G1.” TURN PLUS opens the “Linear
path G1” dialog box.
Define the target position and strategy for the path of traverse (see
soft key table).
If required, select “Technology > G and M functions” (or “.. > General
technology“) to define special functions.
Soft keys
Simultaneous
First X, then Z direction
First Z, then X direction
Only in X direction
Only in Z direction