HEIDENHAIN CNC Pilot 4290 V7.1 - Manual (Page 679)

HEIDENHAIN CNC PILOT 4290 679
1
0
.3 P
a
ra
met
e
rs and Oper
ating Resour
ces
Viewing parameter, operating-resource or
backup files
Select “Parameter conversion > Save/Load” (or “.. > Backup/
Restore“) in the Transfer menu.
In the right window, place the cursor on a parameter/operating
resource file or on a backup file.
Press ENTER; the CNC PILOT displays the file contents.
Close the file: Press ENTER again (or press the ESC key).
Press the ESC key to return to the Transfer main
menu.