Linear slot on front/rear face g301-geo, Circular slot on front/rear face g302/g303-geo, 1 0 f ront and rear f a ce cont ours – HEIDENHAIN CNC Pilot 4290 V7.1 User Manual
Page 175
HEIDENHAIN CNC PILOT 4290
175
4.1
0
F
ront and Rear F
a
ce Cont
ours
Linear slot on front/rear face G301-Geo
G301 defines a linear slot in a contour on the front face/rear face.
Circular slot on front/rear face G302/G303-Geo
G302/G303 defines a circular slot in a contour on the front face/rear
face.
G302: Circular slot clockwise
G303: Circular slot counterclockwise
Parameters
XK
Center in Cartesian coordinates
YK
Center in Cartesian coordinates
A
Angle to XK axis (default: 0°)
K
Slot length
B
Slot width
P
Depth/height (default: “P” from G308)
P<0: Pocket
P>0: Island
Parameters
I
Center of curvature in Cartesian coordinates
J
Center of curvature in Cartesian coordinates
R
Curvature radius (reference: center point path of the slot)
A
Starting angle; reference: XK axis (default: 0°)
W
Ending angle; reference: XK axis (default: 0°)
B
Slot width
P
Depth/height (default: “P” from G308)
P<0: Pocket
P>0: Island