HEIDENHAIN CNC Pilot 4290 V7.1 - Manual (Page 403)

HEIDENHAIN CNC PILOT 4290 403
6.4 Cont
ours of W
o
rk
piece Blanks
Cast blank (or forged blank)
This function generates the workpiece blank from an existing finished
part.
Parameters
Surface
„ Cast blank
„ Forged blank
With bore
„ Yes
„ No
K Equidistant oversize for the complete part
I Single oversize (for individual elements or contour sections)
First enter the “single oversize” and then select the
contour element/the contour section.