HEIDENHAIN CNC Pilot 4290 V7.1 - Manual (Page 183)

HEIDENHAIN CNC PILOT 4290 183
4.1
1
Lat
er
al Surf
ace Cont
ours
Full circle on lateral surface G314-Geo
G314 defines a full circle in a lateral-surface contour.
Rectangle on lateral surface G315-Geo
G315 defines a rectangle in a lateral-surface contour.
Parameters
Z Center
C Center (angle)
CY Center as linear value; reference: unrolled reference diameter
R Radius
P Pocket depth (default: “P” from G308)
Parameters
Z Center
C Center (angle)
CY Center as linear value; reference: unrolled reference diameter
A Angle to Z axis (default: 0°)
K Length
B Width
R Chamfer/rounding arc (default: 0°)
„ R>0: Radius of rounding arc
„ R<0: Chamfer width
P Pocket depth (default: “P” from G308)