HEIDENHAIN CNC Pilot 4290 V7.1 - Manual (Page 55)

HEIDENHAIN CNC PILOT 4290 55
2.3 D
a
ta Bac
k
up
2.3 Data Backup
The CNC PILOT stores NC programs, operating-resource data and
parameters on the hard disk. Since the possibility of damage to the
hard disk due to excessive vibration or shock cannot be eliminated,
HEIDENHAIN recommends making regular backup copies of your
programs, operating resource data and parameters on a PC or on USB
memory media.
You can use DataPilot 4290, the WINDOWS “Explorer” or other
suitable programs for backing up your data on a PC.
For data exchange and data backup, you can use the Ethernet
interface and the USB interface. Data exchange on the basis of the
serial interface (RS-232) is also possible.