HEIDENHAIN CNC Pilot 4290 V7.1 - Manual (Page 309)

HEIDENHAIN CNC PILOT 4290 309
4.32 Other G F
unctions
Transferring magazine compensation values
G941
G941 writes in the following variables the compensation values of the
magazine tool to be deposited and to be fetched. The compensation
values describe the deviations of the individual magazine pockets from
the standard dimensions.
In V800, write the number of the tool to be deposited, and use G940
to find the tool to be fetched before you program G941.
„ Compensation values of tool to be fetched:
„ V931: Compensation in X
„ V932: Compensation in Z
„ V933: Compensation in Y
„ V934: Compensation in C
„ Compensation values of tool to be deposited:
„ V935: Compensation in X
„ V936: Compensation in Z
„ V937: Compensation in Y
„ V938: Compensation in C
Servo lag limit G975
G975 switches over to servo-lag limit 2 (MP 1106, ..). G975 is a modal
function. At the end of a program the CNC PILOT switches to the
standard lag error limit.
Activating zero-point shifts G980
G980 activates the workpiece zero point and all zero offsets. Traverse
paths and position values are referenced to the distance of the tool tip
to the workpiece zero point, while taking the zero point shifts into
consideration.
Parameters
H Servo lag limit (default: 1)
„ H=1 Standard servo lag limit
„ H=2 Following error limit 2