Collet chuck parameters, Parameters for face drivers (“without chuck”), 13 pr epar ing a mac h ining pr ocess – HEIDENHAIN CNC Pilot 4290 V7.1 User Manual
Page 489
Advertising
HEIDENHAIN CNC PILOT 4290
489
6.13 Pr
epar
ing a Mac
h
ining Pr
ocess
Collet chuck parameters
Parameters for face drivers (“without chuck”)
Parameters
ID number chuck
Clamp diameter
Free length (distance between front edge of collet and right edge of
blank)
Clamping pressure
The entry is transferred to the program head. TURN PLUS does not
evaluate this parameter.
Parameters
ID number
Indentation depth
Approximate depth to which the grippers press into the material.
TURN PLUS uses this value to position the face driver graphics.
Advertising