Two slides work in succession, 38 lathes with multiple slides – HEIDENHAIN CNC Pilot 4290 V7.1 User Manual
Page 340
Advertising
340
4.38 Lathes with Multiple Slides
Two slides work in succession
Slide 1 executes the roughing operation (N10 to N20).
Then slide 2 finishes the contour (N22 to N34).
N 21 G820 NS3 NE3 P2 I0.5 K0.3 V3
N 22 G47 P3
N 23 G810 NS4 NE6 P4 I0.5 K0.3 Q2
N 24 M109
N 25 G0 X60 Z10
Slide 1: Waiting position (provides cutting speed)
ZUORDNUNG $2 [ASSIGNMENT]
Slide 2: Recessing parallel to roughing
N 26 T4
N 27 G95 F0.2
N 28 G0 X32 Z-44
N 29 M108
N 30 G47 P3
N 31 G866 NS7 I0.2
N 32 G0 X32 Z-44
N 33 M109
N 34 G14 Q0
Slide 2: Move to the tool change position
$1$2 N 35 M97
Slide 1 waits for slide 2
$1 N 36 G14 Q0
Slide 1: Move to the tool change position
$1$2 N 37 M30
Program end for slides 1 and 2
ENDE [END]
Advertising