HEIDENHAIN CNC Pilot 4290 V7.1 - Manual (Page 600)

600
7.
6 Mac
h
ining P
a
ra
met
e
rs
8 – Measuring
The measuring parameters are assigned to the fit elements as an
attribute.
9 – Drilling
Drilling – Approach and departure
Approach and departure are in rapid traverse (G0).
Measurement procedure
Measurement type [MART]
1: Manual measurement – calls expert program
Measuring loop counter [MC]
Defines the measurement/loop intervals.
Current consumption [mA]
Oversize still applied to the element to be measured.
Measuring cut length [MSL]
Approach and departure
„ Approach – end face [ANBS]
„ Approach – lateral surface [ANBM]
„ Departure – end face [ABGA]
„ Departure – lateral surface [ABGI]
Approach/departure strategy:
„ 1: Move simultaneously in X and Z directions
„ 2: First X, then Z direction
„ 3: First Z, then X direction
„ 6: Coupled motion; X precedes Z direction
„ 7: Coupled motion; Z precedes X direction