Yaskawa MP940 Reference Manual - Manual (Page 202)

Parameter Outline MotionSuite™ MP940 Machine Controller Reference Manual
6-2
To create, edit, or change the parameters, use the following methods:
Parameter Editing
Tool Method Settable Parameters
PC Programing
Unit From the Definition folder, edits the parameters in
Parameter Settings window. Fixed Parameters
Setup Parameters
Servo Amplifier Parameters
Motion Program <F17>In the motion program, sets up the parame-
ters by substituting for setup parameter (output
register <F18>OWC000 ~ OWC03F<F17>). Setup Parameters
Ladder Program From the ladder program, stores the parameters
directly to setup parameters. Setup Parameters