Yaskawa MP940 Reference Manual - Manual (Page 276)

SGDH User Parameters MotionSuite™ MP940 Machine Controller Reference Manual
6-76
Speed-related Parameters
A detailed list of speed-related parameters appears below.
Speed Related Parameters
User
Parameter
Number
Digit
Position
Name
(setting
range)
Content
Default
Setting
Control
Mode
Pn300
Speed Reference Input
Gain 0.01V
/
Rated
Speed150
~ 3000 This parameter is not used. 600 Speed
Torque
Position
Pn301
Speed 1 rpm
0 ~ 10000 This user parameter is not used due to
the fact that it is used by the MP940 in
the control type selection Pn000. 1 = 9
(torque speed). 100 Speed
Torque
Position
Pn302
Speed 2 rpm
0 ~ 10000 This user parameter is not used due to
the fact that it is used by the MP940 in
the control type selection Pn000.1 = 9
(torque speed). 200 Speed
Torque
Position
Pn303
Speed 3 rpm
0 ~ 10000 This user parameter is not used due to
the fact that it is used by the MP940 in
the control type selection Pn000.1 = 9
(torque speed). 300 Speed
Torque
Position
Pn304
Jog Speed rpm
0 ~ 10000 Sets the motor speed in running motors
using the panel operator or digital oper-
ator. A motor rotates at maximum speed
if a value higher than the maximum
speed is set. 500 Speed
Torque
Position
SGDM- SGDM- SGDM- SGDM-
MODE/SET DATA/
SERVOPACK
200V YASKAWA
Digital Operator Panel Operator
SGDH-