Yaskawa MP940 Reference Manual - Manual (Page 206)

Parameter Setting MotionSuite™ MP940 Machine Controller Reference Manual
6-6
The default values may be set without inputting each parameter. See the
default values in the Fixed Parameters list.
Set the default values as follows:
1. Select Edit (E) > Default Setting (R) in the Parameters menu.
2. Click the Yes (Y) button in the message box.
3. The default values are set for the fixed parameters.
These default settings apply to the parameters of the currently displayed
servo axis. The setting values are immediately saved into the machine
controller register upon executing the default setting. The current value is
then displayed.
Servo Parameter Setting
Click the Servo Pack tab.
• See SGDH User Parameters for the setting content of the individual servo amplifier parameters.
Servo Pack Tab
Item Name Content
Axis Number The axis number shown in the combo box. Setting for Axis1.
No. These are servo amplifier parameter numbers.
Name Name of the servo amplifier parameter
Input Data Input (select) the Servo Amplifier parameter value.
See the Servo Amplifier Parameters list.
Unit Setting data unit
Current Value The current parameter values are displayed in the online mode.
Nothing is displayed in the offline mode.